OEM/ODM China Boehmite Cost - 4N 99.99% high purity Boehmite – Zhanchi
OEM/ODM China Boehmite Cost - 4N 99.99% high purity Boehmite – Zhanchi Detail:
AlOOH is γ－Al2O3 precursor, with its unique chemical, optical and mechanical properties, has been widely used in the fields of ceramic materials, composites, surface protective layer materials, optical materials, catalysts and carrier materials, semiconductor materials and coatings. Uniform and stable dispersion is one of the important conditions for boehmite to exert its superior properties of nano materials; The boehmite has the characteristics of small size, specific surface and large pore volume.
Boehmite belongs to biconical point group in orthorhombic system. It is white crystal. Due to the impurities contained in it, it often has yellow, green, brown or red spots, with glass or pearl luster. The Mohs hardness is 3 to 3.5 and the specific gravity is 3 to 3.07. Boehmite is a positive biaxial crystal.
With the increase of hydrolysis temperature, the crystallinity of the product increased significantly, and the specific surface and pore volume decreased significantly; Controlling a certain pH value, increasing the hydrothermal treatment process and increasing the amount of water can significantly improve the dispersion of boehmite sol; Prolonging the hydrothermal time will reduce the specific surface and pore volume of the product. The results showed that the optimum hydrolysis temperature was 85 ~ 90 ℃, the hydrothermal treatment temperature was 200 ℃ and the treatment time was three hours.
The 4N 99.99% high purity boehmite produced by our company has high content, less magnetic foreign matters, stable electrical properties, low content of harmful ions, high heat resistance and narrow particle size distribution.
|
4N 99.99% high purity boehmite/AlOOH |
|||
|
Type |
|
CX102 |
CX102A |
|
Al2O3 Content |
% |
≥99.95% |
≥99.99% |
|
Phase state |
|
γ-AlOOH |
γ-AlOOH |
|
Appearance |
|
white power |
white power |
|
Na |
ppm |
≤50 |
≤30 |
|
Fe |
ppm |
≤20 |
≤20 |
|
Ca |
ppm |
≤10 |
≤10 |
|
Si |
ppm |
≤20 |
≤10 |
|
Cu |
ppm |
≤10 |
≤2 |
|
Mg |
ppm |
≤10 |
≤2 |
|
D50 (Size) |
um |
0.8-3mm |
0.1-3mm |
|
Apparent Density |
g/cm3 |
0.5～0.8 |
0.5～0.8 |
|
Specific Surface |
m2/g |
2～6 |
2～6 |
4N 99.99% high purity Boehmite/AlOOH was widely used in surface protective layer material, catalytic field, inorganic flame retardant, papermaking filler, lithium battery diaphragm coating and so on
We also have other type 4N high purity Boehmite/AlOOH,contact with us for OEM
Product detail pictures:
Related Product Guide:
With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for our clients for OEM/ODM China Boehmite Cost - 4N 99.99% high purity Boehmite – Zhanchi , The product will supply to all over the world, such as: Detroit, Sydney, Zurich, We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
By Rae from Vancouver - 2018.12.25 12:43
On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
By Olivia from Slovenia - 2018.12.22 12:52
